Battery diagnostics

OWNER ACCESS 01 / 03

Identify your battery

Use the serial number engraved on the battery and the email address registered when it was commissioned.

EMAIL VERIFICATION02 / 03

Check your inbox

The code has 6 digits and is valid for 10 minutes.

Keryon Battery

SN ----

Offline

CHECK RESULT

Awaiting readingsConnect the battery to start the check.

CURRENT CHARGE-- %State of charge

ESTIMATED RANGE--Based on current consumption

CYCLE COUNT--Equivalent full cycles

TELEMETRY

Battery data

No readings

Remaining capacity-- Ah

Pack voltage-- V

Battery temperature-- °C

Current status--

Balancing--

BMS version--

Manufacture--

Commissioning--

DETAILED ANALYSIS

Cell balance and BMS history

Data transmitted by the ESP32

MIN. CELL VOLTAGE-- VCell --

MAX. CELL VOLTAGE-- VCell --

CURRENT MAX. DIFFERENCE-- mVMin. / max. difference

CELL BALANCINGPendingNew readings required

ACTIVE ERRORS--Reported in these readings

STORED ERRORS--Cumulative BMS counter

TEMPERATURE TOO LOW--Stored limit exceedances

TEMPERATURE TOO HIGH--Stored limit exceedances

These counters show historical events. A stored value does not mean an error is currently active. Full technical codes and extreme values remain available in Keryon's internal system.

PERSONAL HISTORY

Your Keryon diagnostics

Dated reports

No saved checks yet.